Hacks of Electronics
A current to voltage converter circuit produces output voltage with respect to input current. An I to V converter is used to convert varying current into equivalent output voltage. This circuit is very much useful when the measuring instrument can measure only voltages not the current and we want to measure the output current. The […]
Gunn diode operates on the Gunn effect which is named after its inventor J.B. Gunn. He discovered the periodic variation of current in a GaAs (gallium arsenide) rod in 1963. The microwave device that operates on the principle of transfer of electrons is called as Gunn diode. This is one of the diodes used as […]
The VI characteristics of IGBT is as shown in Figure. In the forward direction, they are similar to those of bipolar transistors. The only difference here is that the controlling parameter is the gate to source voltage Vgs and the parameter being controlled is the drain current. The working principle of IGBT is based on […]
An Insulated Gate Bipolar Transistor in short IGBT is a three-terminal semiconductor device it is a hybrid of MOSFET and BJT for high efficiency and fast switching. The power BJT has the advantage of low on state power dissipation, but it cannot be switched at faster rates due to longer turn-off time, whereas MOSFETs have […]
The full form of TRIAC is Triode for Alternating Current. Let’s discuss working of Triac with vi characteristics and Applications. A Triac is a bidirectional device it allows current to flow in both the directions. It is also known as a bidirectional triode thyristor or bilateral triode thyristor. In the SCR family, after the SCR, […]
The diac is basically a two-terminal device. Here we will discuss the Symbol of Diac and it’s VI characteristics. It is such a combination of semiconductor layers that allows triggering in both directions. The diac is used as a triggering device for the TRIAC circuits. Here we will discuss the Symbol of Diac and it’s […]