Hacks of Electronics
In this blog we will be discussing about different types of diode and symbol. A diode is basically two terminal electronic device which allows current to flow in one direction while it blocks the current in other direction.
It is made of two types of semiconductor materials namely p-type and n-type. By varying the properties of these materials different types of of diode are manufactured. Here are some different type of diodes described as follow.
Schottky diode
PN junction diode
Avalanche diode
Zener diode
Light Emitting Diode
Photodiode
Laser diode
A power diode is a semiconductor device specifically engineered to conduct large currents and withstand high reverse voltages in power electronic circuits. It is fundamentally a PN junction diode, but its internal structure, doping profile, and packaging are optimized for high-power operation rather than low-level signal processing. In power electronic systems, power diodes play a […]
A TVS (Transient Voltage Suppression) diode is a specialized semiconductor device used to protect electronic circuits from high-voltage transients such as electrostatic discharge (ESD), lightning surges, and switching spikes. It responds extremely fast and clamps overvoltage to a safe level before they damage sensitive components. Modern electronic systems are highly sensitive to voltage spikes caused […]
This article explains clamper circuits from the ground up including their types, mathematical analysis, waveforms, working principle, differences, applications, and real-world design considerations. Clamper circuits are fundamental waveform-shaping networks used in electronics to shift the entire signal level either upward or downward without altering the overall shape of the waveform. Unlike clippers, which remove or […]
A Clipper Circuit, also called a limiter, is an electronic circuit that removes or “clips” selected portions of an input signal without distorting the remaining waveform. Its primary purpose is to prevent a signal from rising above or falling below a specified voltage level. Because of this, clippers are widely used in waveform shaping, signal […]
Voltage multiplier circuit forms a fundamental building block in high-voltage power supplies where the output voltage must be several times greater than the peak input voltage, yet the load current required is relatively small. Instead of using high-turn-ratio transformers which are large, expensive, and limited by insulation and core saturation constraints engineers often implement multipliers […]
The Light Emitting Diode (LED) is one of the most widely used electronic components today, found in everything from indicator lights to full-scale lighting systems. It is a type of diode that converts electrical energy into light energy, offering a highly efficient alternative to traditional bulbs. Unlike incandescent lamps that rely on heating a filament, […]